Hitachi HT18 Complete Rebuild Kit
Basic T3 Kit
| #1 | Journal Bearings |
| #2 | Retaining Rings for Journal Bearings |
| #3 | Piston Ring for Turbine End |
| #4 | Thrust Bearing |
| #6 | Seal, YOU SPECIFY TYPE (See Above) |
| #7 | Seal Ring for Bearing Housing |
| #10 | Locknut for Shaft |
| #11 | Gasket for Compressor Housing |
Complete T3 Rebuild Kit
| #1 | Journal Bearings |
| #2 | Retaining Rings for Journal Bearings |
| #3 | Piston Ring for Turbine End |
| #4 | Thrust Bearing |
| #5 | Thrust Collar |
| #6 | Seal, YOU SPECIFY TYPE (See Above) |
| #7 | Seal Ring for Bearing Housine |
| #8 | Thrust Spring for Backing Plate |
| #9 | Thrust Spacer (only used in 4pc Carbon Seal Kit) |
| #10 | Locknut for Shaft |
| #11 | O-Ring/Gasket for Compressor Housing |
| #12 | Bolts for Compressor End |
| #13 | Clamps for Compressor End |
| #14 | Bolts for Bearing Housing |
| #15 | E-Clip for Swingvalve |
| #16 | Lock Plates for Turbine End |
| #17 | Bolts for Turbine End |
| #18 | Clamps for Turbine End |
Garrett T3/T4 Hybrid Rebuild Kit
Garrett T3/T4 Hybrid Rebuild Kit
This is a COMPLETE rebuild kit for GARRETT T3/T4 Hybrid turbos. This kit comes complete with all of the correct bolts and clamps for a T3/T4 Hybrid, not just the bolts for one or the other. This is for a T3/T4 turbo with a dynamic seal on the compressor end as most hybrids are. We have the carbon seal kit available if that is needed for your application. We also have T3/T4 High performance kits available.
There are two types of compressor housing clamps for hybrid turbos; they are the T04B clamps and the T04E clamps. Please take a look at the picture to determine which clamps you need, and make your choice from the dropdown menu. If you do not specify which clamps you need, the T04B clamps will be sent with the kit.
| #1 | Journal Bearings |
| #2 | Retaining Ring for Journal Bearings |
| #3 | Piston Ring for Turbine End |
| #4 | Thrust Bearing |
| #5 | Thrust Collar |
| #6 | Piston Ring for Compressor End |
| #7 | Seal Ring for Bearing Housing |
| #8 | Thrust Spring |
| #9 | Locknut for Shaft |
| #10 | O-Ring/Gasket for Compressor Housing |
| #11 | Bolts for Compressor End |
| #12 | Lockplate for Compressor End |
| #13 | Clamps for Compressor End |
| #14 | Bolts for Bearing Housing |
| #16 | Lock Plates for Turbine End |
| #17 | Bolts for Turbine End |
| #18 | Clamps for Turbine End |
Big Shaft & T-Series High Performance Rebuild Kit
| #1 | Journal Bearings |
| #2 | Retaining Ring for Journal Bearings |
| #3 | Stepped Gap Piston Ring for Turbine End |
| #4 | 360° Thrust Bearing |
| #6 | Piston Ring for Compressor End |
| #7 | Seal Ring for Bearing Housing |
| #8 | Thrust Spring |
| #9 | Locknut for Shaft |
| #10 | O-Ring/Gasket for Compressor Housing |
| #12 | Lockplate for Compressor End |
| #13 | Clamps for Compressor End |
| #17 | Bolts for Turbine End |
| #18 | Clamps for Turbine End |
Installation Gasket Set
KKK K03 Gasket Set
- For 1.8T VW Passat and Audi A4/A6
- High-Quality OEM Gaskets
Basic T3 Kit
| #1 | Journal Bearings |
| #2 | Retaining Rings for Journal Bearings |
| #3 | Piston Ring for Turbine End |
| #4 | Thrust Bearing |
| #6 | Seal, YOU SPECIFY TYPE |
| #7 | Seal Ring for Bearing Housing |
| #10 | Locknut for Shaft |
| #11 | Gasket for Compressor Housing |
Complete T3 Kit
| #1 | Journal Bearings |
| #2 | Retaining Rings for Journal Bearings |
| #3 | Piston Ring for Turbine End |
| #4 | Thrust Bearing |
| #5 | Thrust Collar |
| #6 | Seal, YOU SPECIFY TYPE (See Above) |
| #7 | Seal Ring for Bearing Housing |
| #8 | Thrust Spring for Backing Plate |
| #9 | Thrust Spacer (only used in 1pc and 4pc Carbon Seal Kit) |
| #10 | Locknut for Shaft |
| #11 | O-Ring/Gasket for Compressor Housing |
| #12 | Bolts for Compressor End |
| #13 | Clamps for Compressor End |
| #14 | Bolts for Bearing Housing |
| #15 | E-Clip for Swingvalve |
| #16 | Lock Plates for Turbine End |
| #17 | Bolts for Turbine End |
| #18 | Clamps for Turbine End |
Garrett T3/T4 Hybrid Rebuild Kit
This is a COMPLETE rebuild kit for GARRETT T3/T4 Hybrid turbos. This kit comes complete with all of the correct bolts and clamps for a T3/T4 Hybrid, not just the bolts for one or the other. This is for a T3/T4 turbo with a dynamic seal on the compressor end as most hybrids are. We have the carbon seal kit available if that is needed for your application. We also have T3/T4 High performance kits available.
There are two types of compressor housing clamps for hybrid turbos; they are the T04B clamps and the T04E clamps. Please take a look at the picture to determine which clamps you need, and make your choice from the dropdown menu. If you do not specify which clamps you need, the T04B clamps will be sent with the kit.
More Details
#1 Journal Bearings #2 Retaining Ring for Journal Bearings #3 Piston Ring for Turbine End #4 Thrust Bearing #5 Thrust Collar #6 Piston Ring for Compressor End #7 Seal Ring for Bearing Housing #8 Thrust Spring #9 Locknut for Shaft #10 O-Ring/Gasket for Compressor Housing #11 Bolts for Compressor End #12 Lockplate for Compressor End #13 Clamps for Compressor End #14 Bolts for Bearing Housing #16 Lock Plates for Turbine End #17 Bolts for Turbine End #18 Clamps for Turbine End
Big Shaft & T-Series High Performance Rebuild Kit
| #1 | Journal Bearings |
| #2 | Retaining Ring for Journal Bearings |
| #3 | Stepped Gap Piston Ring for Turbine End |
| #4 | 360° Thrust Bearing |
| #6 | Piston Ring for Compressor End |
| #7 | Seal Ring for Bearing Housing |
| #8 | Thrust Spring |
| #9 | Locknut for Shaft |
| #10 | O-Ring/Gasket for Compressor Housing |
| #12 | Lockplate for Compressor End |
| #13 | Clamps for Compressor End |
| #17 | Bolts for Turbine End |
| #18 | Clamps for Turbine End |
T2, T25, and T28 Dynamic Seal Complete Rebuild Kit
| #1 | Journal Bearings , 2 Sets (Narrow & Wide) |
| #2 | Retaining Rings for Journal Bearings |
| #3 | Retaining Ring for Oil Deflector |
| #4 | Oil Deflector Seal/Washer |
| #5 | Piston Ring for Turbine End |
| #6 | Thrust Bearing |
| #7 | Bolts for Thrust Bearing |
| #8 | Seal Ring for Seal Plate |
| #9 | Thrust Collar |
| #10 | Piston Ring for Compressor End |
| #11 | Seal Plate |
| #12 | Retaining Ring for Seal Plate |
| #14 | Locknut for Turbine Shaft, 0.264″ (6.70mm) |
| #16 | O-Ring for Compressor Housing |
| #17 | Retaining Ring for Swing Valve |
| #18 | Retaining Ring for Turbine End |
| #19 | Bolts for Turbine End |
| #20 | Clamps for Turbine End |
Shopping Cart
Shopping Cart
Your shopping cart is empty
Visit the shop
Quick Link
- Garrett T2, T25, and T28 Rebuild Kits
- Garrett T3, T4, T3/T4 Rebuild Kits
- Garrett GT Kits and Other Garrett Kits
- Hitachi Turbo Rebuild Kits
- Holset Turbo Rebuild Kits
- IHI Borg Warner Rebuild Kits
- KKK Rebuild Kits
- Mitsubishi Rebuild Kits
- Cummins/Rotomaster Rebuild Kits
- Schwitzer Rebuild Kits
- RaJay Rebuild Kit
- Toyota Rebuild Kits
Go Daddy
