Hitachi HT18 Complete Rebuild Kit
Hitachi HT10B Turbo Rebuild Kit
| #1 | Journal Bearings |
| #2 | Retaining rings for journal bearings |
| #3 | Turbine end piston ring |
| #4 | Thrust bearing |
| #5 | Bolts for thrust bearing |
| #7 | Compressor end piston ring |
| #9 | O-ring for bearing housing to seal plate |
| #11 | Compressor locknut |
Hitachi HT18 Complete Rebuild Kit
This is a Hitachi HT18 complete rebuild kit for the Mazda RX7 application. We also have a high-performance option available in the drop-down menu of the kit.
| #1 | Journal Bearings |
| #2 | Retaining Rings for Journal Bearings |
| #3 | Piston Ring for Turbine End |
| #4 | Thrust Bearing |
| #5 | Thrust Collar |
| #6 | 1pc Carbon Seal (See Above) |
| #7 | Seal Ring for Bearing Housing |
| #8 | Thrust Spring for Backing Plate |
| #9 | Thrust Spacer |
| #10 | Locknut for Shaft |
| #11 | O-Ring/Gasket for Compressor Housing |
| #12 | Bolts for Compressor End |
| #13 | Clamps for Compressor End |
| #14 | Bolts for Bearing Housing |
| #15 | E-Clip for Swingvalve |
| #17 | Bolts for Turbine End |
| #18 | Clamps for Turbine End |
Shopping Cart
Shopping Cart
Your shopping cart is empty
Visit the shop
Quick Link
- Garrett T2, T25, and T28 Rebuild Kits
- Garrett T3, T4, T3/T4 Rebuild Kits
- Garrett GT Kits and Other Garrett Kits
- Hitachi Turbo Rebuild Kits
- Holset Turbo Rebuild Kits
- IHI Borg Warner Rebuild Kits
- KKK Rebuild Kits
- Mitsubishi Rebuild Kits
- Cummins/Rotomaster Rebuild Kits
- Schwitzer Rebuild Kits
- RaJay Rebuild Kit
- Toyota Rebuild Kits
Go Daddy
